Download Infinix Hot 4 X557 Official Stock ROM Firmware - Enochtech Download Infinix Hot 4 X557 Official Stock ROM Firmware | Enochtech

Saturday, 3 September 2016

Download Infinix Hot 4 X557 Official Stock ROM Firmware

As at August 2016, Infinix mobility launched their Infinix hot 4 X557, the phone is beautiful and also came with beautiful and wonderful specifications. today I will be sharing with you How to flash Infinix hot 4 X557 official stock ROM with SP flash tool, but before we begin, lets look at a few specification of the infinix hot 4 X557, the Infinix hot 4 comeswith android 6.0 right out of the box, 5.5 inch screen display, 16GB ROM and 2GB ram, 8Mp rear camera and 5Mp front facing camera and also a huge 4000mAH battery.

How to flash Infinix hot 4 X557 official stock ROM with SP flash tool
  
Disclaimer; this site and its developers are not responsible if you should brick your phone in the process, ensure you are conversant with flashing custom roms and also using SP flash tool before carrying out this process.

Requirements

-Download VCOM Drivers
-Download SP Flash tool

How to Flash the Infinix Hot 4 X557 official stock ROM

-First of all, before anything, you have to download and extract the required tools from the link above and also the ROM which will be provided in the link below to a folder. (unzip using winrar)

-Once extracted, Launch the VCOM driver (if you don't have never installed it on your PC) then disable driver signature enforcement on windows 8, windows 8.1 and windows 10. and install the necessary drivers, now the purpose of installing these drivers is that without them, nothing will work.

-Once you are done setting up the VCOM drivers, open the folder you extracted SP flash tool to and double click on the SP flash tool software to launch it, or better still right click on it and "run as administrator".

-After SP flash tool must have loaded, click on "scatter loading" then locate and select scatter file from the extracted folder.

-Once selected, click on the drop down menu, by the far left and select "firmware upgrade".

-now go turn on developer mode on your infinix hot 4 X557, (go to settings, click on about and click on build number 7 times and developer options will be turned on, click on developer options, locate USB debugging and activate).

-Once done with the above procedure, switch off your Infinix hot 4 and connect it to PC via a USB cable.

-Once connected, click on "download", you should see a running progress bar in SP flash tool, while process is running,do not interrupt the process nor tamper with the USB cable.

-Once it finishes running, you should see a good green mark, after which disconnect the USB cable from the device and reboot.

Download Infinix Hot 4 X557 Official Stock ROM 1.32GB

First reboot do take up to 8mins, if you do have any feedback whatsoever be sure to use the comment box below and I will get back to you shortly.

You Might Also Like:

MATCHED CONTENT UNDER THIS CATEGORY

0 Comments

we love comments and hope to see more of you, feel free to use the comment box and the social share buttons